Eupen GNLM 3G1,0


can be shipped within 1-3 days

9.00 / metre(s)
Price incl. VAT, plus Shipping
Price reductions
m

Bulk Eupen Typ LP / GNLM 3G1,0 Audio Line EMC/COM

 

If you want to order 4,5m, simply specify quantity 4,5. You will then get 4,5m of cable in one piece. (Steps 0,50m)
 
  • Conductor Cu-Strand  VDE 0295, Class 5
  • Absorption layer Ferrite (EMC/COM)
  • Isolation PVC
  • Shielding Aluminium-Polyester Band
  • Outer jacket PVC, gray with lettering
  • Structure based on VDE 0281 Part 402, Reg.Nr. 11359372
  • Dielectric strength2 kV
  • Capacitance (wire/screen): 400pF/m +/-10%
  • Inductance (1 conductor loop)2,7uH/m +/-10%
  • R Conductor: 20,0 Ohm/km
  • Cross-section 1,0 qmm (31 Strands x 0,2mm)
  • Cross section of braided shield  0,5 qmm (16 Srands x 0,2mm)
  • Outer diameter 9,1mm 

This technology is based on a high-quality ferrite-based powder. A special blend has been developed, composed of a polymer material mixed with a significant amount (up to 90%) of ferrite powder. The mixture is applied to copper conductors by extrusion and is called EMC/COM.
The ferrite powder is electrically non-conductive; it has very interesting magnetic properties. Because ferrite is a ferromagnetic material, it is constantly remagnetized in an alternating magnetic field. The magnetization follows a hysteresis loop and with each cycle energy is withdrawn from the electromagnetic field, which is released again as heat. This process increases steadily with frequency. The ferrite layer on a conductor causes higher frequencies to be heavily attenuated because most of their energy is absorbed in the ferrite powder. This applies both to high-frequency interference which travels along the conductor and which must not disturb the environment, and to interference which occurs in the environment and which should not affect the signal on the cable.

 

Customers who bought this product also bought

Eupen GNLM 3G2,5
16.50 / m *
*
Price incl. VAT, plus Shipping

Browse this category: Eupen Kabelwerk